Trials Trail & Enduro Parts > 2. Honda Trials Parts > TL125 Parts
Pair of Rear Shocks - TL125
New improved models coming late May so unavailable until then
New Honda TL125 Betor Trials Gas Rear Shock Absorbers
14.96" (380mm) Length
1 pair
Latest additional to the Betor Range
These are the new lightweight version of the trusted Betor Trial Shocks. The spring holder is aluminium rather than steel. The spring adjuster and upper mount for the shock are also aluminium saving about 10% of the weight.
The spring is infinitely adjustable by means of a screw thread rather than a circlip & grooves. We set the springs length at 250mm before shipping, this is a good place to start
Damper bodies are steel with a chrome finish
Choice of 40lb or 50lb spring. We recommend the 40lb spring on the TL125
4.1" (105mm) Travel
11mm Damper Rod
Damped using a combination of Oil & Nitrogen
2.1 kgs
Fully rebuildable
Ready to fit and use
Please note:- NEVER touch the valve unless you are re-gassing the shock they are not adjustable!
Can be used either way round
Supplied with 8mm Bushes for the top mounting points
Standard Length for TL125
Prices include VAT at the standard rate
Postage prices are charged by weight and this can be checked at any time by following the instructions below.
Add item(s) to your basket and then click the basket link that appears in the shopping basket box top right ↗↗.
This will take you to your shopping basket where you select you shipping country and the postal charge for your item(s) will be displayed.
Please remember that you are not committing yourself to buy the item(s) until you complete checkout. Even then, if you change your mind, no problem we’ll just delete it!
