Swinging Arm Repair Kit - TY125 & TY175

Seized Spindle? Here's what you need to fix it instructions included.

New Yamaha Swinging Arm Repair Kit

For all models of TY125 & TY175 twinshock

from 1975 to 1985

Consists of the following-

Swing Arm Spindle and Nut-OEM

Metal Long Bush-OEM

2x Metalastic End Bushes-OEM

2 x End Covers / End Caps / Seal Guards-OEM

2 x Shims

There is an inherent problem on the TY125, TY175 and TY250 Twinshock that when the spindle seizes within the arm it is very difficult to remove. The only way to remove a seized spindle is to cut through both ends of the spindle between the frame and swinging arm with a hacksaw. The arm can then be removed from the frame from the rear and the metal bush with the spindle inside can then be pushed out with your finger!

DO NOT try and remove the spindle with a big hammer & drift, blow torch or hydraulic press all you will end up doing is twisting, warping or breaking the arm!

This kit contains all that is needed to replace the damaged parts and we recommend on reassembly to use a good copper grease on all components and to regrease at least once a year

We also have the TY250 Twinshock Kit